The Monolith suit is an armour featured in S.T.A.L.K.E.R.: Lost Alpha.
“ | Stalker suit from the Monolith faction. The producer is unknown. Its protective properties are slightly worse then those of the PSZ-9a military bulletproof vest. Its structure is similar to the suit popular with neutral stalkers which combines a bulletproof vest and a radiation protection suit. It provides good protection from gunfire. Its level of anomaly protection is low due to the absence of an air filtering system. - PDA description |
” |
Overview[]
- Standard armour of the Monolith faction.
- Offers pretty good protection, but obviously not in situations with a high level of psy radiation.
- Suit was renamed to "Adept" Monolith suit in v1.4007.
Upgrades[]
Lost Alpha[]
List of upgrades |
---|
A0 Section
wound_protection = 0.47 - 1,600RU |
Developer's Cut[]
-v1.4005
List of upgrades | |||||
---|---|---|---|---|---|
ID | Icon | Upgrade | Description | ||
Cost | Effect | Requirements | |||
1A | Polycarbonate plates | Polycarbonate plates can stop a pistol bullet, while weighing as little as a piece of ordinary plastic. | |||
750 RU |
Bulletproof cap +10% |
Tools for rough work (v1.4005 only) | |||
1C | Self-sealing layer | A self-repairing armour layer helps the armour to compensate for bullet impact. | |||
1500 RU |
Impact -20% |
| |||
1D | Backup layer of protective plates | An additional, internal layer of plates protects the user, if the external one is damaged. | |||
1500 RU |
Suit durability +15% |
| |||
1E | Scale ceramic armour | The Scale system consists of tens of ceramic plates on top of each other, to provide excellent protection, even after receiving damage from bullets or shrapnel. | |||
3500 RU |
Bulletproof cap +30% |
Calibration toolkit (v1.4005 only) | |||
2A | Lightweight, synthetic polymer materials | To reduce the weight of the armour, fasteners and gaskets are replaced with ones made of lighter synthetic materials. | |||
850 RU |
Outfit weight -3.5 kg |
Tools for rough work (v1.4005 only) | |||
2C | Magnesium inserts | Magnesium inserts protect from extremely high temperatures. | |||
1500 RU |
Burn +20% |
| |||
2D | Sealed polyethylene lining | Dense polyethylene lining protects from poisonous substances and electrical shock. | |||
1500 RU |
|
| |||
2E | Impregnated fabric costume | Impregnated fabric prevents the poisoning of the body with harmful chemicals. | |||
3600 RU |
Chemical burn +30% |
Calibration toolkit (v1.4005 only) | |||
2F | Rubberised fabric suit | Rubber provides basic protection from short-term radiation exposure. | |||
3600 RU |
Rad.protection +30% |
Calibration toolkit (v1.4005 only) | |||
3A | Oxygen cylinders | Without oxygen cylinders, you can't survive for long in a polluted atmosphere, whether radioactive or chemical. | |||
1050 RU |
|
Tools for rough work (v1.4005 only) | |||
3C | Load bearing mounting system | This mounting system allows you to evenly distribute the load over the entire body. | |||
2300 RU |
Additional weight +10 kg |
| |||
3E | "Custody" medical module | A simple module for decontamination, tetanus prevention and stimulant injection. It is rather primitive, but doesn't leave lasting lacerations from its injections. | |||
5000 RU |
Health regeneration +2 |
|
v1.4007+
List of upgrades | |||||
---|---|---|---|---|---|
ID | Icon | Upgrade | Description | ||
Cost | Effect | Requirements | |||
1A | Polycarbonate plates | Polycarbonate plates can stop a pistol bullet, while weighing as little as a piece of ordinary plastic. | |||
550 RU |
|
| |||
1C | Self-sealing layer | A self-repairing armor layer helps the armor to compensate for bullet impact. | |||
1200 RU |
|
| |||
1D | Backup layer of protective plates | An additional, internal layer of plates protects the user, if the external one is damaged. | |||
1200 RU |
Suit durability +40% |
| |||
1E | Scale ceramic armor | The Scale system consists of tens of ceramic plates on top of each other, to provide excellent protection, even after receiving damage from bullets or shrapnel. | |||
2500 RU |
|
| |||
2A | Lightweight, synthetic polymer materials | To reduce the weight of the armor, fasteners and gaskets are replaced with ones made of lighter synthetic materials. | |||
550 RU |
Outfit weight -2.2 kg |
| |||
2C | Magnesium inserts | Magnesium inserts protect from extremely high temperatures. | |||
1200 RU |
Burn +20% |
| |||
2D | Sealed polyethylene lining | Dense polyethylene lining protects from poisonous substances and electrical shock. | |||
1200 RU |
|
| |||
2E | Impregnated fabric costume | Impregnated fabric prevents the poisoning of the body with harmful chemicals. | |||
2400 RU |
Chemical burn +30% |
| |||
2F | Rubberized fabric suit | Rubber provides basic protection from short-term radiation exposure. | |||
2400 RU |
Rad. protection +30% |
| |||
3A | Oxygen cylinders | Without oxygen cylinders, you can't survive for long in a polluted atmosphere, whether radioactive or chemical. | |||
850 RU |
|
| |||
3C | Load bearing mounting system | This mounting system allows you to evenly distribute the load over the entire body. | |||
2300 RU |
Additional weight +8 kg |
| |||
3E | "Custody" medical module | A simple module for decontamination, tetanus prevention and stimulant injection. It is rather primitive, but doesn't leave lasting lacerations from its injections. | |||
2500 RU |
Health regeneration +1 |
3C | |||
4A | Polarity switching | Restarts of the psi-receivers of the suit, turning them into blockers. | |||
5100 RU |
Telepathy +50% |
|
Notes[]
- One can be found in Recruits' forfeit stash under a set of stairs in the Monolith Base, Dark Valley. Stairs is located next to a hole filled with anomalies and radiation.
- Another piece can be found in a locker in Pripyat Underground, adjacent to the Phantom Stash Cupboard.
- One piece is hidden behind a couch in one of the houses in the Monolith Camp at X-7 Entrance (-v1.4005, replaced with a "Preacher" Monolith suit in v1.4007).