The Exoskeleton is an armour that appears in S.T.A.L.K.E.R.: Lost Alpha and all other canon S.T.A.L.K.E.R. games.
“ | A military exoskeleton prototype. It never went into serial production, because of extreme cost and some design flaws. It is however produced in small batches in small illegal factories outside of Ukraine. This is a third generation exoskeleton. The design defects which used to decrease its mobility were eliminated and the armor was reinforced. It provides excellent bullet and splinter protection. It has a low level of anomaly protection. - PDA description |
” |
Overview[]
- The standard issue Exoskeleton as seen in S.T.A.L.K.E.R. and S.T.A.L.K.E.R.: Lost Alpha games.
Upgrades[]
Lost Alpha[]
List of upgrades |
---|
A0 Section
A1 Section
A2 Section
|
Developer's Cut[]
-v1.4005
List of upgrades | |||||
---|---|---|---|---|---|
ID | Icon | Upgrade | Description | ||
Cost | Effect | Requirements | |||
1A | Titanium alloy components | Titanium is usually too heavy for use in body armour, but its effective when used in conjunction with an exoskeleton. | |||
3500 RU |
Bulletproof cap +10% |
Tools for rough work (v1.4005 only) | |||
1C | Knee and elbow pads | A set of knee and elbow pads, designed to protect joints from bullets and shrapnel. | |||
5400 RU |
Bulletproof cap +20% |
| |||
1D | Segmented protection | Subtler armoured sheets that overlap each another, like scales, increase overall damage resistance. | |||
5400 RU |
Suit durability +15% |
| |||
1E | Kurassier Titanium plating | An obscene amount of titanium plating would be too heavy for the average trooper, but not for one using a powered exoskeleton. | |||
6600 RU |
Bulletproof cap +30% |
| |||
1F | "Screen" Combination Plating | A combination of polymers and ceramics forms the basis for this multiple layer protection system. | |||
6600 RU |
Impact -30% |
| |||
2A | Absorbing silicone sealants | Silicone sealants are more efficient than rubber at dampening shocks and protecting the carrier. | |||
3500 RU |
Impact -10% |
Tools for rough work (v1.4005 only) | |||
2C | Constantan insulation layer | Even a thin layer of constantan in the suit will provide excellent insulation from electric current. | |||
5400 RU |
Electric shock +20% |
| |||
2D | Thermal protection fibreglass | Fibreglass is widely used by Ukrainian Ministry of Emergency workers in their equipment. | |||
5400 RU |
Burn +20% |
| |||
2E | "Environmentalist" polymer overalls with bismuth inserts | A protective suit, created from next generation polymers, with bismuth inserts. | |||
6600 RU |
|
| |||
2F | "Tow" leaded suit | A domestic development which appeared after the Chernobyl accident. Used in the exoskeleton to protect the electronics. | |||
6600 RU |
|
| |||
3A | Internal thermoregulation system | "Breathing" overalls with an integrated safety filter, providing you with a degree of safety in polluted environments. | |||
3500 RU |
Power restore +2 |
| |||
3C | Replacement of metal parts with carbon fibre | Design pioneered by Freedom's engineers, in order to reduce the weight of their first exoskeletons. Carbon fibre parts are just as durable as metal ones. | |||
5400 RU |
Outfit weight -10 kg |
3A | |||
3E | "Walker" stress reduction system | This system uses powerful springs and hinges, reducing the stress and allowing the wearer to conserve a lot of strength when moving. | |||
7800 RU |
Power restore +3 |
3C | |||
4A | Servomotor amplification | Amplified servomotors increase the exoskeleton's load bearing capacity. | |||
3500 RU |
Additional weight +10 kg |
Tools for rough work (v1.4005 only) | |||
4D | Reinforcing drives | Reinforcing parts of the exoskeleton protects it from destruction by bullets and shrapnel. | |||
5600 RU |
Suit durability +15% |
| |||
4F | Additional hydraulic servomotor amplifiers | Hydraulic amplifiers which allow you to switch to running mode are the main difference between the fourth and third generations of exoskeletons. | |||
12800 RU |
Sprint capability |
| |||
5A | Active filters | Active filters can neutralize even the most corrosive chemicals. | |||
3500 RU |
|
Tools for rough work (v1.4005 only) | |||
5C | Screening coverage | Application of screening coverage | |||
5500 RU |
Telepathy +20% |
| |||
5D | 2nd Generation PNV | A better night vision device, designed for operations in complete darkness. | |||
14800 RU |
2nd Gen Night vision |
| |||
5E | "Psi-dome" filter loop | High-tech psi-protection, invented by a scientist named Sakharov. | |||
8800 RU |
Telepathy +30% |
|
v1.4007-
List of upgrades | |||||
---|---|---|---|---|---|
ID | Icon | Upgrade | Description | ||
Cost | Effect | Requirements | |||
1A | Titanium alloy components | Titanium is usually too heavy for use in body armor, but its effective when used in conjunction with an exoskeleton. | |||
3500 RU |
Strengthening of vest 1st class |
Tools for rough work (v1.4005+) | |||
1C | Knee and elbow pads | A set of knee and elbow pads, designed to protect joints from bullets and shrapnel. | |||
5400 RU |
|
| |||
1D | Absorbing silicone sealants | Silicone sealants are more efficient than rubber at dampening shocks and protecting the carrier. | |||
5400 RU |
|
| |||
1E | Cuirassier titanium plating | An obscene amount of titanium plating would be too heavy for the average trooper, but not for one using a powered exoskeleton. | |||
6600 RU |
|
| |||
1F | "Screen" Combination Plating | A combination of polymers and ceramics forms the basis for this multiple layer protection system. | |||
6600 RU |
|
| |||
2A | Oxygen cylinders | Without oxygen cylinders, you can't survive for long in a polluted atmosphere, whether radioactive or chemical. | |||
3500 RU |
|
Tools for rough work (v1.4005+) | |||
2C | Constantan insulation layer | Even a thin layer of constantan in the suit will provide excellent insulation from electric current. | |||
5400 RU |
Electric shock +20% |
| |||
2D | Thermal protection fiberglass | fiberglass is widely used by Ukrainian Ministry of Emergency workers in their equipment. | |||
5400 RU |
Burn +20% |
| |||
2E | "Environmentalist" polymer overalls with bismuth inserts | A protective suit, created from next generation polymers, with bismuth inserts. | |||
6600 RU |
|
| |||
2F | "Tow" leaded suit | A domestic development which appeared after the Chernobyl accident. Used in the exoskeleton to protect the electronics. | |||
6600 RU |
|
| |||
3A | Internal thermoregulation system | "Breathing" overalls with an integrated safety filter, providing you with a degree of safety in polluted environments. | |||
3500 RU |
Power restore +2.5 |
| |||
3C | Replacement of metal parts with carbon fiber | Design pioneered by Freedom's engineers, in order to reduce the weight of their first exoskeletons. Carbon fiber parts are just as durable as metal ones. | |||
5400 RU |
Outfit weight -10 kg |
| |||
3E | "Walker" stress reduction system | This system uses powerful springs and hinges, reducing the stress and allowing the wearer to conserve a lot of strength when moving. | |||
7800 RU |
Power restore +3 |
| |||
4A | Servomotor amplification | Amplified servomotors increase the exoskeleton's load bearing capacity. | |||
3500 RU |
Additional weight +10 kg |
Tools for rough work (v1.4005+) | |||
4D | Reinforcing drives | Reinforcing parts of the exoskeleton protects it from destruction by bullets and shrapnel. | |||
5600 RU |
Suit durability +40% |
| |||
4F | Additional hydraulic servomotor amplifiers | Hydraulic amplifiers which allow you to switch to running mode are the main difference between the fourth and third generations of exoskeletons. | |||
12800 RU |
Servomotor amplifiers (enables sprinting) |
| |||
5A | Active filters | Active filters can neutralize even the most corrosive chemicals. | |||
3500 RU |
|
Tools for rough work (v1.4005+) | |||
5C | Screening coverage | Application of screening coverage | |||
5500 RU |
Telepathy +20% |
| |||
5D | 3rd Generation NVD | A better night vision device, designed for operations in complete darkness. | |||
14800 RU |
Upgrade to 2nd Gen Night vision (enhanced) |
| |||
5E | "Psi-dome" filter loop | High-tech psi-protection, invented by a scientist named Sakharov. | |||
8800 RU |
Telepathy +30% |
|
Notes[]
- Also adds 20 resp. 30 kg to carrying capacity for a player.
- Despite the PDA description the armour still impairs the mobility:
- In Lost Alpha (-v1.3003) it is not possible to run wearing this armour (unless cheating).
- In the Developer's Cut (v1.4000+) you have to upgrade the armour to be able to run.
- Can be bought from Barkeep and Ugrymiy. Can be bought from Sidorovich after reaching Pripyat.
- Located between the topmost 2 of the 6 concrete cupolas in the middle-northern part of the map CNPP., leaning against a pipe support.
Trivia[]
- Before v1.4005, The Exoskeleton and the Exoskeleton's prototype are the only two armours in Developer's Cut with the possibility for an upgrade of Night vision capabilities.
- v1.4007 and possibly v1.4006 had lost this upgrade, even though upgrade files state otherwise. There is a fix (restoration) for v1.4007 on ModDB, or see Bugfixing.